PROPERTY DETAILS :
Total amount as per mentioned specification. The Builder shall provide all material contract construction.
SPECIFICATION :
1. FOUNDATION :-
With necessary excavation 5' feet , refilling, 1 course size stones mansonry work.
2. BRICK WORK :
Walls are with solid cement blocks 6” thick in CM 1:6 for external walls and 4” walls for inside walls.
3. SAND :
M Sand for concrete and Block Work, River Sand for Plastering work.
CEMENT :
For concrete RCC, 53 Grade Birla Super.
For solid work, 53 Grade Birla Super.
Inside/Outside Plastering 43 Grade Cement.
5. WOOD :
Main Door – Teak Wood, Other Door Frame – Red Sal Wood (3”/5”), all windows -UPVC
Shutters : Honne Wood.
Fittings for carpentry work : All doors aluminum powder coated.
Bedroom and Flush doors
Bathroom : WPVC Doors.
6. STEEL
As for drawing
7. KITCHEN SLAB :
30 MM thick green granite slab, 24” X 24” steel sink.
8. ELECTRICAL WORKS :
Providing and laying concealed wiring and (ISI , Anchor Maharaja and Cobra) switches GM with adequate light, fan, geyser and power points as per site. For each room two light point, one fan point, two 5A point, one AC Point, and TV Point will be provided. One 15A Geyser point for bathrooms and Two 5A15A point for kitchen will be provided.
9. PLUMBING WORK :
- Supreme Pipe 4 Gauge for sewage, rain water pipe.
- C.P.V. Pipe – Ashirwad Make.
- For Toilet : 1 Shower point, 1 Tap, 1 Wash Basin.
- Kitchen: 1 Top Point, and One Aqua Guard Point.
- 1000 Liters OHT PVC tank.
- The Sanitary wares are Hindustan make (Parryware)
- FITTINGS : Taps SS Make.
10.PAINTING :
- For outer wall one coat primer and two coat of ACE (Asian Make).
- For inner walls one coat of based primer and two coat of tractor emulsion (Colour shall be owner’s choice).
- For wood and steel enamel paint (Asian Make)
- For main door polish.
11.TILES :
- Will be provided with ceramics floor tiles/vitrified 24” X 24” (Basic rate Rs.60/- Sft. (including GST).
- For Toilet : Ceramic tile cost (12” X 18”) = Rs.45/ per Sft
- Kitchen : Ceramic tile cost (12” X 18”) = Rs.45/ per Sft – (including GST).
12.WELDING WORK :
- Providing and fixing M.S. Railing by welding etc., of Staircase railing including applying priming coat of approved steel prime as per owner choice Final rate will be decided after design rate quoted is approximate, final rates to be given after the design basic rate of mild steel is Rs.50/Kg.
- Providing and fixing MS Gate. 1.5 Kg/s (total weight should not exceed 2.0 Kg/s Sft. (Basic rate of Mild Steel Rs.50/ Kg.)
13. Extra works owners risk listed below.
- Sump (without pump). RCC – 25 Rs. Sft, wall : 18 Rs. Sft
- Compound Wall 450 Sft.
- Roof muddy – 250 Sft.
- Parapet wall 450 Sft.
- External drainage work.
- Providing and making rain water harvesting system
- Providing and fixing brass pipe and accessories for gas line
- Providing and fixing plaster of Paris and false ceiling flower design etc.
- Any fabrication in place of parapet wall and safety grill.
- Cladding work with stone, tiles, granite, designer tiles etc.,
- Any design in granite works like border, full and half nosing at edge self at corner etc.
- Electrical fixture like fancy fittings etc.,
- Wood works like wardrobes, kitchen storage, Modular Kitchen, T.V Showcase and racks etc.
- Mosquito mesh work for window.
- Outside Sanitary works and septic tank.
- Electrical panel board fixing (Permanent connection)
- Out of building any work for extra.
14.Owners risk listed below.
- Water for building work (Owner In charge).
- KEB Meter (Owner In charge)
- Temporary Service and Bill (Owner In charge)